Brake System Warning Light

The vehicle may not pass inspection if:

. The light is on when the engine is running.

. The light does not come on when the ignition is in Service Mode.

. Critical emission control systems have not been completely

diagnosed. If this happens, the vehicle would not be ready for inspection and might require

several days of routine driving before the system is ready for

inspection. This can happen if the 12-volt battery has recently been

replaced or run down, or if the

vehicle has been recently serviced.

See your dealer if the vehicle will not pass or cannot be made ready for

the test.

Service Vehicle Soon Light (PLUG-IN Only)

This light comes on if a condition exists with the propulsion system.

If the light comes on, take the vehicle to your dealer for service as soon as

possible.

Brake System Warning Light

The vehicle brake system consists of

two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For

normal braking performance, both circuits need to be working.

If the warning light comes on, there is a brake problem. Have the brake

system inspected right away.

Metric English

This light should come on briefly

when the engine is started. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem.

If the light comes on and stays on, there is a brake problem.

{ Warning

The brake system might not be working properly if the brake

system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been

pulled off the road and carefully

stopped, have the vehicle towed for service.