Interior Rearview Mirrors

Adjust the rearview mirror for a clear view of the area behind your vehicle.

Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water.

Automatic Dimming Rearview Mirror

The vehicle has an automatic

dimming rearview mirror. The mirror

Pull the tab rearward to turn on the display. Push the tab forward to turn it off. When off, the mirror is

KEYS, DOORS, AND WINDOWS 57

To adjust the brightness, press the

button (1) on the back of the rearview mirror without covering the light

will automatically reduce the glare

from the headlamps from behind. The dimming feature comes on when the

vehicle is started.

Rear Camera Mirror

If equipped, this automatic dimming mirror provides a wide angle camera view of the area behind the vehicle.

automatic dimming. Adjust the mirror for a clear view of the area behind the vehicle while the display is off.

sensor (2).

Each button press cycles the

brightness between five settings.

58 KEYS, DOORS, AND WINDOWS

{ Warning

The Rear Camera Mirror (RCM) has a limited view. Portions of the road, vehicles, and other objects may not be seen. Do not drive or park the

vehicle using only this camera.

Objects may appear closer than

they are. Check the outside mirrors or glance over your shoulder when making lane changes or merging.

Failure to use proper care may

result in injury, death, or vehicle damage.

The camera that provides the Rear

Camera Mirror (RCM) image is above the license plate, next to the Rear

Vision Camera (RVC).

To clean the rear camera, see

Windshield Wiper/Washer 0 120.

Troubleshooting

If the tab is in the rearward position

and a blue screen and d are displayed

in the mirror and the display shuts off, see your dealer for service.

The RCM may not work properly or display a clear image if:

. There is glare from the sun or headlamps. This may obstruct objects from view.

. Dirt, snow, or other debris blocks the camera lens. Clean the lens

with a soft damp cloth.

. The back of the vehicle has been damaged and the position and

mounting angle of the camera has changed.