< Previous | Contents | Next >

122 INSTRUMENTS AND CONTROLS


image

With Rainsense, if the transmission is

in N (Neutral) and the vehicle speed is very slow, the wipers will

automatically stop at the base of the windshield.

The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has

increased.

Rear Camera Washer


image

If equipped, push the windshield

wiper lever forward to spray washer fluid on the rear camera lens. The

lever returns to its starting position

when released. See Rear Camera Mirror

0 57.

image

Compass

The vehicle may have a compass display on the Driver Information

Center (DIC). The compass receives its heading and other information from

the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle

speed information.

The compass system is designed to

operate for a certain number of miles or degrees of turn before needing a

signal from the GPS satellites. When

the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS

signal. The compass system will

automatically determine when a GPS signal is restored and provide a

heading again.

Clock

The infotainment system controls are used to access the time and date

settings through the menu system.

See Home Pagein the infotainment

manual for information about how to use the menu system.

image

Setting the Clock

Time

To set the time:

1. From the Home Page, touch SETTINGS, then touch Time and Date.

2. Touch Set Time, then touch + or

to increase or decrease hours or minutes, and change AM

or PM.

3. Touch 12-24 Hr for a 12 or 24 hour clock.

4. Touch 0 to go back to the previous menu.

Date

To set the date:

1. Touch SETTINGS, then touch Time and Date.

2. Touch Set Date, then touch + or

to increase or decrease month, day, or year.

3. Touch 0 to go back to the previous menu.