< Previous | Contents | Next >
Climate Controls
Climate Control Systems
Automatic Climate Control System (Quad Zone -
Air Vents
Maintenance
Climate Control Systems
Automatic Climate Control System (Dual Zone - Gasoline and PLUG-IN)
The climate control buttons on the center stack and on the climate control display are used to adjust the heating, cooling, and ventilation.
Center Stack Climate Controls
1. Driver and Passenger Temperature Controls
2. Fan Control
3. Driver and Passenger Heated and Ventilated Seats (If Equipped)
4. Rear Window Defogger
5. Defrost
6. OFF (Fan)
7. Recirculation
8. AUTO (Automatic Operation)
CLIMATE CONTROLS 191
Climate Control Display (Gasoline Only)
1. Outside Temperature Display
2. Driver and Passenger Temperature Controls
3. Fan Control
4. A/C (Air Conditioning)
5. Climate Control Selection (Application Tray Button)
6. SYNC (Synchronized Temperature)
7. Driver and Passenger Air Delivery Mode Controls
8. Defog
9. Ionizer Status Indicator (If Equipped)
Climate Control Display (PLUG-IN Only)
1. Outside Temperature Display
2. Driver and Passenger Temperature Controls
3. Fan Control
4. Heater and A/C (Air Conditioning)
5. Climate Control Selection (Application Tray Button)
6. SYNC (Synchronized Temperature)
7. Driver and Passenger Air Delivery Mode Controls
8. Defog
Climate Control Display
The fan, air delivery mode, air
conditioning, driver and passenger
temperatures, and SYNC settings can be controlled by touching CLIMATE
on the infotainment Home Page or the climate button in the climate control
display application tray. A selection
can then be made on the front climate control page displayed. See the
infotainment manual.
Climate Control Status Display
192 CLIMATE CONTROLS
The climate control status display appears briefly when the climate
control buttons on the center stack are adjusted.
Automatic Operation
The system automatically controls the fan speed, air delivery, air
conditioning, and recirculation in
order to heat or cool the vehicle to the desired temperature.
When the indicator light is on or AUTO is displayed on the climate
control display, the system is in full
automatic operation. If the air delivery mode or fan setting is manually
adjusted, the auto indicator turns off and the display will show the selected
settings. Auto operation can be turned off individually for climate settings.
For automatic operation:
1. Press AUTO.
2. Set the temperature. Allow the system time to stabilize. Then
adjust the temperature as needed for best comfort.
To improve fuel efficiency and to cool
the vehicle faster, recirculation may be automatically selected in warm
weather. The recirculation light will not come on in AUTO mode. Press
@ to select recirculation; press it
again to select outside air.
English units can be changed to
metric units through the instrument cluster. See “Cluster Options Menu”
under Instrument Cluster (Base Level)
0 127 or Instrument Cluster (Uplevel)
0 130.
The temperature control and air
delivery mode can still be adjusted.
Q / R : The temperature can be
adjusted separately for the driver and the passenger. Press up or down to
increase or decrease the temperature. Press and hold up or down to rapidly increase or decrease the temperature.
The driver and passenger
temperatures can also be adjusted by touching the controls on the climate control display.
control display to link all climate zone settings to the driver settings. When
all climate zone settings are linked,
the SYNC indicator will be lit. Adjust
the driver side temperature control to change the linked temperature. When the front or rear passenger settings
are adjusted, the SYNC indicator will turn off.
Manual Operation
Q 9 R : Press or touch the fan
buttons on the center stack or climate control display, to increase or decrease the fan speed. Press and hold the
buttons to adjust speed more quickly. The fan speed setting displays.
Pressing either button cancels
automatic fan control and the fan can be controlled manually. Press AUTO to return to automatic operation.
information is displayed, touch the desired air delivery mode on the
climate control display to change the direction of the airflow. The selected air delivery mode button is lit.
Touching any of the air delivery
buttons cancels automatic air delivery control and the direction of the
airflow can be controlled manually. Press AUTO to return to automatic operation.
To change the current mode, select one of the following:
Y : Air is directed to the instrument panel outlets.
\ : Air is divided between the
instrument panel outlets and the floor outlets.
[ : Air is directed to the floor outlets.
- : Clears the windows of fog or
moisture. Air is directed to the windshield and floor outlets.
0 : Clears the windshield of fog or
frost more quickly. Air is directed to
the windshield. Press 0 to turn on or
off. Changing the air delivery mode also turns the defrost off.
control display to turn the automatic air conditioning on or off. If the fan is
turned off or the outside temperature falls below freezing, the air
conditioner will not run.
Press AUTO to return to automatic
operation and the air conditioner runs as needed.
Touch Heater & A/C on the climate
control display to turn electric heater and air conditioning on or off.
Press AUTO to return to automatic
operation and the electric heater and air conditioner run as needed.
needed to help quickly cool the inside of the vehicle.
The climate control system may have a sensor to detect air pollution. When using automatic air recirculation, the air quality control system may
operate. To adjust the sensitivity of the air quality sensor, see “Climate and Air Quality” under Vehicle
Personalization 0 168.
CLIMATE CONTROLS 193
@ : Press to alternate between
recirculating air inside the vehicle or pulling in outside air. The indicator
light on the button is lit when
recirculation mode is active. This
helps to quickly cool the air inside the vehicle or reduce the outside air and
odors that might enter.
Pressing this button cancels automatic recirculation. Press AUTO to return to automatic operation; recirculation
runs automatically as needed.
Manual recirculation mode is not
available when in Defrost or Defog modes.
automatically detect high humidity inside the vehicle. When high
humidity is detected, the climate
control system may adjust to outside air supply and turn on the air
conditioner. If the climate control system does not detect possible
window fogging, it returns to normal operation. To turn Auto Defog off or on, see “Climate and Air Quality”
under Vehicle Personalization 0 168.
194 CLIMATE CONTROLS
inside the vehicle and remove
contaminants; such as pollen, odors, and dust. If the climate control
system is on and the ionizer is
enabled, the ionizer status indicator will be lit on the climate control
display. To turn the ionizer on or off, see “Climate and Air Quality” under
Vehicle Personalization 0 168.
Rear Window Defogger
K : Press to turn the rear window defogger on or off. The rear window
defogger only works when the engine is running.
The rear window defogger can be set to automatic operation. See “Climate and Air Quality” under Vehicle
Personalization 0 168. When Auto Rear Defog is selected, the rear window
defogger turns on automatically when the interior temperature is cold and
the outside temperature is about 4 °C (40 °F) and below.
The upper grid lines on the rear
window are antenna lines and are not intended to heat when the defogger is activated.
The heated outside mirrors turn on when the rear window defogger
button is on and help to clear fog or frost from the surface of the mirrors.
Caution
Do not try to clear frost or other material from the inside of the
front windshield and rear window with a razor blade or anything else that is sharp. This may damage the rear window defogger grid and
affect the radio's ability to pick up stations clearly. The repairs would not be covered by the vehicle
warranty.
Press I or + to heat the driver or
passenger seatback only.
Press J or z to heat the driver or
passenger seat cushion and seatback. Press C or { to ventilate the driver or passenger seat. See Heated and
control system may run when the
vehicle is started remotely. The system uses the driver’s previous settings to
heat or cool the inside of the vehicle.
The rear defog may come on during remote start based on cold ambient conditions. The rear defog indicator light does not come on during a
remote start.
If equipped, the heated seats will turn on if it is cold outside or the
ventilated seats will turn on if it is hot outside. The heated and ventilated
seat indicator lights may not come on during a remote start. If equipped, the heated steering wheel will come on in a remote start if it is cold outside. The heated steering wheel indicator light
may not come on.
See Remote Vehicle Start 0 42 and
Heated and Ventilated Front Seats 0 72.