< Previous | Contents | Next >

Cruise Control‌‌

J : Press to turn the system on and off. A white indicator appears in the

instrument cluster when turned on.

RES+ : If there is a set speed in

memory, press briefly to resume to that speed or press and hold to

accelerate. If the cruise control is

already active, use to increase vehicle speed. To increase speed by 1 km/h

(1 mph), press RES+ to the first detent.

To increase speed to the next 5 km/h (5 mph) mark on the speedometer,

press RES+ to the second detent.

SET− : Press briefly to set the speed and activate cruise control. If the

cruise control is already active, use to decrease vehicle speed. To decrease

speed by 1 km/h (1 mph), press SET− to the first detent. To decrease speed to the next 5 km/h (5 mph) mark on

the speedometer, press SET− to the second detent.

* : Press to disengage cruise control without erasing the set speed from

memory.

See Cruise Control 0 240, Adaptive

Cruise Control 0 243 (if equipped),

or Super Cruise 0 251 (if equipped).

Driver Information Center (DIC)

The DIC display is in the instrument cluster. It shows the status of many vehicle systems.

IN BRIEF 21

y or z : Press to go to the previous or next selection.

S or T : Press to move between the interactive display zones in the

cluster. Press S to go back to the

previous menu.

SEL : Press to open a menu or select a menu item. Press and hold to reset

values on certain screens.

See Driver Information Center (DIC)

0 160.

< Previous | Contents | Next >